We have launched E-mail Alert service,subscribers can receive the latest catalogues free of charge

     
     
    You Are Here: Home > Publications> Articles

    Mechanism and Experiences for Technology Digestion, Absorption and Re-innovation in China's Railway Equipment Manufacturing Industry

    2010-07-28

    By Ma Mingjie, Research Office Director of Department of Techno-Economic Research, DRC

    I. Enhancing the Capacity of China's Railway Equipment Manufacturing Industry

    Since the reform and opening up, the innovation on China's railway equipment manufacturing industry can be divided into four stages.

    1. First stage (from 1980s to 1990s): the manufacturing capacity of enterprises was enhanced through technology introduction

    The manufacturing capacity is meant to transform technological achievements into mass production suited to design requirements, including the progressiveness of the equipment, the technical level, the adaptability and the workmanship of workers, the technological design and management ability, etc. The manufacturing capacity is the prerequisite for improving the technical competence of enterprises and can be enhanced immediately through technology introduction. During 1980s, a large-scale technology introduction was carried out for China's railway industry. However, due to China's then poor technological and industrial conditions (even bolts of the same quality as those of other countries could not be purchased) and its lower management ability, the re-innovation had not been realized successfully. Nonetheless, the import of technologies during this period had further interpreted key technologies for enterprises. A number of talented people cultivated at that time had played a critical role in the import of technologies in 2003. China has ever since gained more say in the negotiations for the import of technologies.

    2. Second stage (from 1990s to the beginning of the 21st century): the capability of enterprises to absorb and integrate technologies was stepped up

    During this period, by intensifying R&D, the Chinese enterprises substantially improved their ability to absorb and integrate technologies. The ability of the railway equipment manufacturers to integrate technologies is mainly manifested in three aspects. Firstly, the ability to master key technologies. Secondly, the ability to formulate norms and standards for the utilization of technologies. Thirdly, the ability to design the systems, namely, the ability to properly handle the relationships and functions between main engines and the components.

    The long-term technical accumulation has brought forth a technological foundation and a contingent of trained personnel for business innovation. For example, CSR Sifang Locomotive & Rolling Stock Co. Ltd. has accumulated technologies for bogie designing and manufacturing. The Chinese locomotive manufacturing enterprises think that their own strengths are the basis for the success in technology introduction, digestion, absorption and re-innovation and that the rail speed acceleration conducted for 5 times before 2003 had played a positive role in improving their strength. Although only the technology for manufacturing passenger trains of 160 km/h or lower was achieved, the relatively complete equipment manufacturing system was formed, which laid a foundation for future technology digestion, absorption and re-innovation ("Made in China: The Only Way to Modernization of China's Railway Technology and Equipment", Integrative Transportation, August, 2007).

    Despite the considerable amelioration of the absorption capacity of the enterprises during this period, their technical level remained low and a prodigious amount of key technologies had yet not been achieved. For example, since 1980s, CNR Changchun Railway Vehicle Co. Ltd. had imported quite a number of advanced technologies from Britain, South Korea and Canada for the making of passenger trains, but had not gained the key technology for the making of CRH Electric Multiple Unit of 200km/h. There was still some gap between China and the developed countries in terms of the safety and dependability of bogie, converting and traction techniques and braking system, thus making it difficult to further conduct the rail speed acceleration.

    3. Third stage (from 2003 till now): digestion, absorption and re-innovation characterized by integration innovation

    This period was mainly marked by the grasp of part of the core technologies by the enterprises. The re-innovation made by Chinese enterprises was manifested in two ways.

    Firstly, the imported technologies were transformed to adapt to China's national conditions on the basis of digestion and absorption. For example, the designing of the Electric Multiple Unit was carried out jointly with the foreign partners at the very beginning of the technology introduction to suit the product better to China's national conditions. When importing the high-speed technology from Alsthom Transport, CNR Changchun Railway Vehicle Co. Ltd. (hereinafter referred to as “Changchun RV”) revamped the original wagon considerably.

    Secondly, technologies were upgraded on the basis of the technology introduction. By high-speed train technology, the re-innovation was reflected by the technological upgrading of accelerating the speed from 200 km/h to 300~350 km/h in 2007. Before, transnational corporations possessing the high-speed technology of 300 km/h and above had been Alsthom Transport, Siemens, Bombardier and Kawasaki Heavy Industries Group. By innovation manner, unlike the foreign-dominated design when technologies were imported, the re-innovation featuring technological upgrading was mainly designed by Chinese enterprises, with foreign partners providing technical support. CSR Sifang Locomotive & Rolling Stock Co. Ltd. developed high-speed trains of 300~350 km/h and above and 16 electric multiple units, marking the moment when Chinese enterprises have gained the ability to independently design and manufacture high-speed trains of 300~350 km/h.

    The above-mentioned technology introduction has set up 3 platforms for independent innovation to be conducted by Chinese enterprises in the future. The first is the manufacturing platform, namely, the self-sustaining standard system for high-speed trains suited to China's national conditions. By taking the import, digestion and absorption of 9 key technologies as the leading factor, the industrial chain of R & D, designing and manufacturing of high-speed trains can come into being under the system. The second is the platform of digestion and absorption, on which a complete set of China's own testing and accepting system can be set up, including the transformation of technical drawings and tooling of fabrication technologies. The third is the platform of re-innovation, on which products and technologies can be re-innovated.

    In general, at present the Chinese enterprises have mastered the international advanced manufacturing technologies and have gained the integration ability.

    Stages and Features of the Enhancement of the Capacity of China's Railway Equipment Manufacturing Industry

    Mechanism and Experiences for Technology Digestion, Absorption and Re-innovation in China's Railway Equipment Manufacturing Industry

    First Stage

    Second Stage

    Third Stage

    Fourth Stage

    Technology Source

    Technology introduction

    Technology introduction

    Technology introduction

    Endogeny

    Technical Competence

    Manufacturing Capacity

    Absorption Ability

    Absorption Ability

    Innovation Ability

    Innovation Model

    Block Innovation Simulating Innovation

    Block Innovation Simulating Innovation

    Open Innovation Simulating Innovation Integration Innovation

    Open Innovation Original Innovation Integration Innovation

    Knowledge transferred

    Explicit Knowledge

    Explicit Knowledge

    Implicit Knowledge

    Implicit Knowledge

    4. Fourth stage (medium- and long-term objective): Chinese enterprises have gained the independent innovation ability to research and develop key technologies

    Enhancing the production capacity and the absorption ability is far from bringing about the technology catching-up, which can eventually be realized by enhancing the innovation ability. Realizing the independent innovation by mastering all or major core technologies is the medium- and long-term objective for China's railway equipment manufacturing industry. The enterprises know much about it, thinking that the integration ability is not the ultimate goal of independent innovation and that the innovation input cannot be reduced just because the integration ability is achieved.

    If you need the full text, please leave a message on the website.

     
    国产精品无码永久免费888| 亚洲成a人片在线观看无码| 亚洲中文字幕无码久久2017| 国产成人无码免费看片软件| 中文字幕亚洲一区二区va在线| 亚洲色偷拍区另类无码专区| 亚洲精品无码成人片久久| 新版天堂资源中文8在线| 无码专区一va亚洲v专区在线 | 精品无码久久久久久久动漫 | 亚洲Aⅴ无码专区在线观看q| av区无码字幕中文色| 亚洲av无码国产精品色在线看不卡 | 2022中文字幕在线| 久久久久无码国产精品不卡| 亚洲AV永久无码精品一百度影院| 最近2019免费中文字幕视频三| 日本阿v视频高清在线中文| r级无码视频在线观看| 日韩AV片无码一区二区不卡电影| 日韩av无码中文无码电影| 久久丝袜精品中文字幕| 在线综合+亚洲+欧美中文字幕| 亚洲天堂2017无码中文| 亚洲欧美中文字幕高清在线| 国产 亚洲 中文在线 字幕| 国产精品xxxx国产喷水亚洲国产精品无码久久一区 | 无码国产乱人伦偷精品视频| 亚洲一区无码中文字幕| 成在人线av无码免费高潮喷水| 中文字幕国产| 日韩人妻无码一区二区三区 | 亚洲成AV人片在线观看无码| 97无码人妻福利免费公开在线视频| 中文字幕在线观看国产| 久久精品99无色码中文字幕| 精品久久久无码中文字幕天天| 久久久久亚洲精品中文字幕| 中文字幕在线免费看线人| 直接看的成人无码视频网站| 中文字幕手机在线观看|